Driscoll’s Lab Offices

Eleciserve Electrical installed a complete electrical solution from compartment trunking to conduit to accommodate new offices layout. New 3 phase distribution boards and supplies were installed in order to accommodate additional loads. Designer light fittings were installed alongside energy efficient LED panels. A complete overhaul of the existing non-compliant emergency lighting system was installed at the point of the rewire and a brand new data system was also installed throughout the offices.

Wolseley Headquarters

We undertook this project on behalf of one of our major clients Cloud FM whom are a premier facilities management company. Cloud FM's talented team had calculated the cost savings and provided a solution for the Wolseley Group in which then Eleciserve seamlessly delivered. Installing close to a thousand luminaires in a timely manner with minimal disruption to the client in an office working environment.

76 Cannon Street

This project was a complete Cat A fit-out after the initial strip out of the 7 storey office block on Cannon Street in central London.

The scope of this project was to include new main MCCB Panel board to accommodate all 7 floors and basement, with adjoining suit shop also. Each floor was supplied with it's on 3 phase Schneider distribution board comprising of small power and lighting for each office space and toilets.

All lighting installed is high end with Dali daylight dimming drivers and sensors with a manual override contactor located at the DB.All lighting is by Fagerhult with an array of over 16 different types of lights fitted throughout, with architectural designer lighting located both on the roof top garden and main reception. Emergency lighting and category L1 fire alarm system has been installed throughout along with a video intercom access control system.

Sutton Yard - Barbican, London

We undertook this extremely high end "industrial look" Cat B office fit-out at the offices of renowned Architects Jestico+Whiles in central London. The scope was quite demanding with an even more demanding time frame to deliver the project within an 8 week window.

A full containment system was installed throughout comprising of galvanised metal conduit, tray and trunking systems for all lighting, small power and 12 different Distribution boards to include the server room and model workshop.
A high end lighting control system was design to tie in with the Cat A Simmtronic system. A lot of thought was put into the containment for the lighting along with the wiring in order to compensate for the various different fittings installed that operated on a number of different voltages whilst all needing to have a Dali dimming capability.

For the small power, Elektrak underfloor busbar trunking was installed along with RCD protected desk modules throughout the office space allowing greater discrimination of circuits and preventing nuisance tripping.
We were extremely proud to have completed this project and with keeping such a prestigious client with a "critical eye" happy, it made it all the more satisfying for the Eleciserve project team.